Free Express Shipping

647-943-1999

How to Install and Setup IPTV on Any Device

Setting up your Guru IPTV service on devices like the MAG540w3, MAG544w3, MAG555, UNIPRO and IPTV App is straightforward.

This installation guide will walk you through the installation and activation process for each device and IPTV App ensuring a smooth viewing experience.

General Requirements:

Before starting, ensure you have:

  • ✔Guru IPTV Subscription: An active IPTV subscription, if you don't have one you can buy now.
  • ✔Stable Internet Connection: A reliable internet connection, either wired (Ethernet) or wireless (Wi-Fi).
  • ✔HDMI-Compatible TV: A television with an available HDMI port.
  • ✔Included Accessories: HDMI cable, power adapter, and remote control (typically provided with the set-top box).

MAG540w3 and MAG544w3 Installation Setup

Step 1: Unbox and Connect the Device

  • ✔ HDMI Connection: Connect one end of the HDMI cable to the set-top box and the other end to your TV.
  • ✔ Power Connection: Plug the power adapter into the device and connect it to a power outlet.
  • ✔ Internet Connection:
    1. Wired: Connect an Ethernet cable from your router to the device for a stable connection.
    2. Wireless: During setup, select your Wi-Fi network and enter the password.

Step 2: Initial Setup

  • ✔Power On: Turn on your TV and the set-top box.
  • ✔Language Selection: Choose your preferred language when prompted.
  • ✔Network Configuration: If using Wi-Fi, select your network and enter the password.
  • ✔Time Zone: Set your local time zone.
  • ✔Software Update: If prompted, allow the device to update its software for optimal performance.

Step 3: Activate Guru IPTV Service

  • ✔Portal Setup: Access the device's settings and navigate to the "Servers" or "Portals" section.
  • ✔Enter Portal URL: Input the portal URL provided by Guru IPTV.
  • ✔Save and Reboot: Save the settings and restart the device.

Step 4: Enjoy Your Content

  • ✔ After rebooting, the device will load the Guru IPTV interface, granting access to a wide range of channels and on-demand content.
MAG540w3-MAG544w3-Installation-Setup

MAG555 Installation Setup

Step 1: Unbox and Connect the Device

  • ✔ HDMI Connection: Attach the HDMI cable between the MAG555 and your TV.
  • ✔ Power Connection: Connect the power adapter to the device and plug it into an outlet.
  • ✔ Internet Connection:
    1. Wired: Use an Ethernet cable from your router to the MAG555.
    2. Wireless: Select your Wi-Fi network during the setup process and enter the password.

Step 2: Initial Setup

  • ✔ Power On: Switch on your TV and the MAG555.
  • ✔ Language Selection: Choose your desired language.
  • ✔ Network Configuration: For Wi-Fi, select your network and input the password.
  • ✔ Time Zone: Set the appropriate time zone.
  • ✔ Software Update: Update the device's software if prompted.

Step 3: Activate Guru IPTV Service

  • ✔ Portal Setup: Go to the device's settings and find the "Portals" section.
  • ✔ Enter Portal URL: Input the portal URL provided by Guru IPTV.
  • ✔ Save and Reboot: Save your settings and restart the MAG555.

Step 4: Access Content

  • ✔ Once rebooted, the device will display the Guru IPTV interface, allowing you to browse and watch various channels and on-demand content.
MAG555-Installation-Setup

UNIPRO Installation Setup

Step 1: Unbox and Connect the Device

  • ✔ HDMI Connection: Connect the HDMI cable from the UNIPRO to your TV.
  • ✔ Power Connection: Plug the power adapter into the device and then into a power source.
  • ✔ Internet Connection:
    1. Wired: Connect an Ethernet cable from your router to the UNIPRO.
    2. Wireless: Choose your Wi-Fi network during setup and enter the password.

Step 2: Initial Setup

  • ✔ Power On: Turn on your TV and the UNIPRO device.
  • ✔ Language Selection: Select your preferred language.
  • ✔ Network Configuration: For Wi-Fi connections, select your network and input the password.
  • ✔ Time Zone: Set your local time zone.
  • ✔ Software Update: Allow any available software updates to install.

Step 3: Install IPTV Application

  • ✔ Access App Store: Navigate to the device's app store.
  • ✔ Download IPTV App: Search for and install the IPTV application recommended by Guru IPTV.

Step 4: Activate Guru IPTV Service

  • ✔ Launch IPTV App: Open the installed application.
  • ✔ Enter Credentials: Input the login details or activation code provided by Guru IPTV.
  • ✔ Save and Access Content: Save the settings to access the channel lineup and on-demand content.
UNIPRO-Installation-Setup